3D Printed Speaker? The rule breaker is getting a new enclosure
- This topic has 1 reply, 1 voice, and was last updated 2 years ago by
.
-
Posts
-
-
I decided to work on a new enclosure for the row breaker. I wanted to make it a little bit easier for some people to be able to make. So I’m working on a 3-D printed enclosure. Currently I do have to break into two pieces because it is too large for my printing bed.
Currently, I have one side of it finished. I’m gonna finish the second side when the rest of my material comes in next week.
I think this will be a good time to test the acoustical losses/Benefits of 3-D printed versus wood. So for this test, I actually chose a pretty big infill of 50 and 8 outer layers. When I get finished, I’ll do some testing.
-
Working on the second half of the build. This is a long print, but I’m excited about it.
-
- You must be logged in to reply to this topic.