$3500 Speakers for $350? Klipsch KL-650 Inspiration
Hi , do the speakers need to be recessed into the front baffle and how close do you need to be with the brace cut outs to the plan , my old fashioned cnc ie me a jigsaw and a router isn’t as accurate
@ralphee they should be recessed if you can. But I do understand that not everyone can recess them. You'll get a little bit more diffraction, but it'll still work.
As far as the brace itself, it can really be anything you want. I just did that design so that I could utilize the side of the brace for the side of the port and I also wanted some space back in the back where I could get to the terminals easily. But if you want to do it a differently, you could. So it's actual shape is really not that important.
@boogeyman I’m making a set of 5 speakers. I took the time to make two front baffles just as router templates for the five. This way I place the template over the baffle and run my router with a top ball bearing on my plunge router for the full hole. Then I use my second template set for the cut outs to flush mount the horn and drivers.
The initial making of the templates was good planning and a circle jig for my router.
quick question would the crossover work with 8 inch midrange instead of 6
Ok just checking i have a pretty big room if you dont mind me asking is it a couple of components i would have to change
Got you no worries just got off work and was looking at speakers