3D printed Nautilus...
 
Notifications
Clear all

3D printed Nautilus Speaker  

  RSS

123Toid
(@123toid)
Illustrious Member Admin
Joined: 3 years ago
Posts: 936
12/07/2020 12:40 pm  

Well I finished one of the 3D printed speakers. This is a nautilus style that will take a full range driver. Right now I'm going to probably use the Dayton audio ps-95 - 8. It fits and it's the only one I have on hand that does fit. So we'll go ahead and start some testing there. I also have the Dayton audio DSP board, that I might mess around with this with.  If you are interested in the download, I got it at thingiverse.  and I am using my new Creality Ender 5, which printed this as one shell. Yay!  No Gluing!  

IMG 20200709 213619 280
IMG 20200710 163606
20200710 203814
20200711 015111
IMG 20200712 020840 380
20200712 113604

Quote
TVOR-Ceasar
(@tvor-ceasar)
Reputable Member Registered
Joined: 1 year ago
Posts: 407
15/07/2020 10:55 pm  

Sweet! What is it, about 8" + - high? If it is, what's the workspace on that printer?? What's the time like on that print? And last, when can we expect a sound sample? 😀

All questioning aside, it's got to feel pretty good to get results like that. They just look cool.

-Charlie


ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 3 years ago
Posts: 936
18/07/2020 11:46 pm  

@tvor-ceasar

It's pretty hard to actually measure, lol. It is around 10.5" talll, but 8.5" deep and 4" wide The printer is capable of 200mm by 200mm by 400mm.  Which is approximately 8.65" wide and 15.75" tall.  Here is an idea of how it looks like to the slicing software on my machine bed. 

Capture

ReplyQuote
TVOR-Ceasar
(@tvor-ceasar)
Reputable Member Registered
Joined: 1 year ago
Posts: 407
19/07/2020 12:38 am  

That's a pretty healthy workspace.

Have you tested them yet? Wondering how they sound.

Hey, if they work out well enough, you could save them for MWAF (whenever that "might" happen).

-Charlie


123Toid liked
ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 3 years ago
Posts: 936
19/07/2020 12:41 am  

@tvor-ceasar

I plan ontesting one of them tonight.  I hadn't got the chance yet.  I haven;t printed the second one yet.  I need to get some more filament.  Hopefully, it will turn outwell enoughm I want to print the other one.  I plan to use the Dayton DSP board to fine tune them. 


ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 3 years ago
Posts: 936
19/07/2020 12:59 am  

@tvor-ceasar

I do enjoy the workspace.  I also really like that the bed is stationary, which makes printing bigger items much more stable. THis printer the bed moves down and the nozzle stays at the same height.


ReplyQuote
Share:
%d bloggers like this: