Forum

The new build - The...
 

The new build - The Alyen’s  

Page 3 / 3
  RSS

Lindelium18
(@lindelium18)
Estimable Member Registered
Joined: 4 months ago
Posts: 120
21/10/2019 4:22 pm  

@kevin-kendrick

Sadly I do not have DATS. I’m still (im)patiently waiting for my V3 to come in. Yeah, I haven’t checked anywhere besides PE but I think a 500 uF cap is like $9... and I’ll need 5 for each speaker. For MWAF, I’m not going to use an additional amp so that I can enter them into the DAYTON category. So, it kind of depends on what I’m going to do with them after MWAF to determine what I need to buy for the low end high pass. That’s the other reason I haven’t purchased anything thus far.  I think the next step is going to be round everything over and then move on. I’m hoping to get a DATS next month. Then I can start playing around with it and start getting some more accurate numbers.

 

edit:  actually, I just looked and madisonsound has 1000uf caps for less than $9 and 500uf for around $6 so $25 or so for a 18hz highpass. But then again, I’m going to have to look at winisd and see at what wattage they say xmax will be an issue. I may not need it at all for MWAF. Then I can look at maybe dropping the coin on a pair of Dayton 250w plate amps with DSP. But at $180 each...that’s a lot of coin. 


123Toid liked
ReplyQuote
Kevin Kendrick
(@kevin-kendrick)
Estimable Member Registered
Joined: 6 months ago
Posts: 100
21/10/2019 7:21 pm  

@lindelium18

Darn, was really hoping you'd have the DATs. Thought I saw something the other day on the TT Forum about the new version being in stock very soon. Hope they're bringing enough in to cover the demand, it would stink to be waiting and then see them go into an "Out of Stock" situation right after they land.

Personally, I wouldn't worry about the HP filter for MWAF, they're not playing anything music wise that that will create an issue for that woofer.

A couple of your videos including the last one you posted are showing up as "Invalid".  Nothing happens if I click on them to play em.  Maybe it's a setting on my computer though, since no one else has said anything. Anyway, best of luck on the rest of your build. We'll have a chance to meet face to face at next years MWAF, hope to see you there.


ReplyQuote

TVOR-Ceasar
(@tvor-ceasar)
Estimable Member Registered
Joined: 6 months ago
Posts: 203
21/10/2019 9:08 pm  
Posted by: @kevin-kendrick

...

A couple of your videos including the last one you posted are showing up as "Invalid".  Nothing happens if I click on them to play em.  Maybe it's a setting on my computer though, since no one else has said anything. Anyway, best of luck on the rest of your build. We'll have a chance to meet face to face at next years MWAF, hope to see you there.

If I use IE on my computer here at home, it says Invalid, while chrome will either show a video or a sound player. Chrome on my phone shows everything. 

I'd love to make MWAF and meet some of you guys in person if possible. We'll see if the old knees hold out. (Replacements would be great before then! Don't think PE has anything for that. LOL)

-Charlie


ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 2 years ago
Posts: 535
22/10/2019 12:04 am  

Haha, I don't think they do.  Not unless you want to march to the beat of a different drum (I mean driver).  🙂 


ReplyQuote

Lindelium18
(@lindelium18)
Estimable Member Registered
Joined: 4 months ago
Posts: 120
22/10/2019 1:10 am  

@kevin-kendrick

Some of the videos I shot at 240 frames to try to get the slo-mo woofer porn for you guys but it seems the player in the forum is not a big fan of that. That might be your issue. Good luck with the knees!


ReplyQuote
Lindelium18
(@lindelium18)
Estimable Member Registered
Joined: 4 months ago
Posts: 120
07/11/2019 4:27 pm  

F7EF5043 07EC 48A8 A414 6311FE6326FA

well, despite my best efforts to screw this thing up...we are making progress!  Still not 100% on whether not to add an amp for the sub but I’m leaning toward yes.  Kind of sucks because I probably wouldn’t have bought just Dayton drivers but it is what it is.  I went ahead and ordered 2 amps and power supplies from Banggood and we will see how it goes...  Once I get the amp in and can get some measurements, I’ll start the crossover. 


123Toid liked
ReplyQuote

123Toid
(@123toid)
Illustrious Member Admin
Joined: 2 years ago
Posts: 535
08/11/2019 1:20 am  

@lindelium18

Your progress is looking great!  I can't wait to see how the crossover goes!


ReplyQuote
DIYAudiphileElliottBridge
(@diyaudiphileelliottbridge)
Trusted Member Registered
Joined: 3 months ago
Posts: 70
08/11/2019 2:36 am  

@lindelium18

You could always convert it to a different video format! 🙂


ReplyQuote

Page 3 / 3

Share:

%d bloggers like this:

Please Login or Register