The Uglies Tower an...
 
Notifications

The Uglies Tower and Surround Build Log  

Page 2 / 2
  RSS

Kingsanguine
(@kingsanguine)
Active Member Registered
Joined: 4 weeks ago
Posts: 9
02/02/2020 4:14 pm  

@123toid

Looking good!


123Toid liked
ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 2 years ago
Posts: 703
03/02/2020 1:55 pm  

@kingsanguine

Thanks.  I am still trying to work in the drivers and come to a crossover that I am happy with.  Right now, I am literally shaking the walls.  It sounds nice and relaxed, but maybe a little too relaxed.  So I am off to brighten it a little. 


ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 2 years ago
Posts: 703
15/02/2020 1:40 am  

The towers are complete along with the crossover.  I do not wish to say how long this crossover took.  I made a lot of minor changes until I got to where I am now.  But I am really happy with it.  So now it is time to start on a center channel.  

The Ugly Center

@barrel


ReplyQuote
123Toid
(@123toid)
Illustrious Member Admin
Joined: 2 years ago
Posts: 703
15/02/2020 1:55 pm  

Since I was asked and forgot to mention it, the center channel will be sealed with tentative dimensions of 22" wide, 9" tall and 12" deep. Components used will be:

2 - Tang Band 6" Underhung drivers

1 - Peerless Corundum tweeter

The plan is to make these an LCR.  In this way you could use these as front, left, right and surround speakers.  The anechoic F3 will be about 70hz. In room, you will probably expect more. 


ReplyQuote
Page 2 / 2
Share:
%d bloggers like this: