Home Forums DIY Speakers and Subwoofers 3D printed Nautilus Speaker

  • 3D printed Nautilus Speaker

  • 123Toid

    Administrator
    July 12, 2020 at 4:40 pm

    Well I finished one of the 3D printed speakers. This is a nautilus style that will take a full range driver. Right now I’m going to probably use the Dayton audio ps-95 – 8. It fits and it’s the only one I have on hand that does fit. So we’ll go ahead and start some testing there. I also have the Dayton audio DSP board, that I might mess around with this with.  If you are interested in the download, I got it at thingiverse.  and I am using my new Creality Ender 5, which printed this as one shell. Yay!  No Gluing!  






  • TVOR-Ceasar

    Member
    July 16, 2020 at 2:55 am

    Sweet! What is it, about 8″ + – high? If it is, what’s the workspace on that printer?? What’s the time like on that print? And last, when can we expect a sound sample? 😀

    All questioning aside, it’s got to feel pretty good to get results like that. They just look cool.

  • 123Toid

    Administrator
    July 19, 2020 at 3:46 am

    @tvor-ceasar

    It’s pretty hard to actually measure, lol. It is around 10.5″ talll, but 8.5″ deep and 4″ wide The printer is capable of 200mm by 200mm by 400mm.  Which is approximately 8.65″ wide and 15.75″ tall.  Here is an idea of how it looks like to the slicing software on my machine bed. 

  • TVOR-Ceasar

    Member
    July 19, 2020 at 4:38 am

    That’s a pretty healthy workspace.

    Have you tested them yet? Wondering how they sound.

    Hey, if they work out well enough, you could save them for MWAF (whenever that “might” happen).

  • 123Toid

    Administrator
    July 19, 2020 at 4:41 am

    @tvor-ceasar

    I plan ontesting one of them tonight.  I hadn’t got the chance yet.  I haven;t printed the second one yet.  I need to get some more filament.  Hopefully, it will turn outwell enoughm I want to print the other one.  I plan to use the Dayton DSP board to fine tune them. 

  • 123Toid

    Administrator
    July 19, 2020 at 4:59 am

    @tvor-ceasar

    I do enjoy the workspace.  I also really like that the bed is stationary, which makes printing bigger items much more stable. THis printer the bed moves down and the nozzle stays at the same height.

Viewing 1 - 6 of 6 replies

Start of Discussion
0 of 0 posts June 2018
Now