need help with DIY Tower speakers
so just a while ago I assembled one of my Tower speakers and it has almost no bass, as in it can push a lot of bass, but it’s really quiet compared to the rest of the frequency spectrum.
The pictures show the unfinished Tower and the assembled one. In theory, they should play down to 38 Hz. The used drivers are a Dayton Audio DC28F-8 1 1/8″ Tweeter and two RS180-4 7″ Woofers. The woofers are wired in series with each other and parallel to the tweeter giving a theoretical impedance of 4 Ohms. The 2 Ports are 43mm diameter and tuned to 39 Hz.
This screenshot shows the theoretical frequency response using the official measurements given by Dayton Audio, which I would be very happy with.
The pictures above show the crossover design for the woofers as well as the tweeter. They have been soldered together as shown on the screenshots, even with me checking them multiple times.
Is hope the data given help understand what’s going on in my case. If you need anything else just ask and I’ll try to provide it as long as I have it.