Voxel-Sub-Passive Build

[Steven M]

So I added a pair of Voxel Subs to my Mini Dina build for a desktop speaker set up. I’m pushing them with one of two different amps, the first being a Up2Stream Amp 2.1 (50W x2 output with a 100W sub output) and the second a Lepy LP-168S (45W x 2 + 68W x 1RMS).

For some reason the sound cuts out if I push the volume up on either amp. It cuts back in when I lower the volume.

Anyone have a guess as to why this might be happening.

---

Steven Monczka

[123toid]

It usually cuts out when the impedance is too low. THat is weird with either of them, as the subwoofer should not be the issue. However, if you did not run a capacitor on the tweeter, that might be the issue. One way to check it to run just the subwoofer and see what happens.

---

https://www.youtube.com/123toid

[Steven M]

It is the sub that is cutting out. I’m using a <b style=”font-family: inherit; font-size: inherit;”>TDA7498E Bluetooth Power Amplifier Board with Subwoofer 2.1 Amp for testing. It’s a cheap little amp but has separate volume and crossover controls. When I push the sub crossover it cuts out. P.S. Yes I did run the caps on the tweeter this time. Thanks for the help!

---

Steven Monczka

[123toid]

😁 That’s great to hear that you’re running the caps. As far as the issue goes, you might just be running out of power. What kind of power supply are you running?

---

https://www.youtube.com/123toid

[Steven M]

It was the power. I’m using a variable voltage power supply and didn’t notice that it was set to 12V and not 24V. Thank you!

---

Steven Monczka

[123toid]

Excellent! So glad you got it figured out!

---

https://www.youtube.com/123toid

[Author]

Posts