Blog Forums DIY Amplifiers and Electronics DSP – how, why, troubleshooting, different hardware, etc. Reply To: DSP – how, why, troubleshooting, different hardware, etc.

#25105
AJC
Participant

OK, I didn’t like my answer, so here is more information:

You, like I, probably do not have the schematic file for the pinout and how the components for the device is connected. As such, if you try to create a file in CCES, you could have issues. This is why they provide that for the evaluation board in this post:

https://ez.analog.com/dsp/software-and-development-tools/sigmastudio-for-sharc/f/q-a/167682/adsp-21489-noob-questions

https://ez.analog.com/dsp/software-and-development-tools/sigmastudio-for-sharc/w/documents/9487/faq-is-it-possible-to-generate-an-application-ldr-with-schematic-code-and-parameter-embedded-in-it

Click to access SigmaStudio_5F00_No_5F00_Download_5F00_Mode.pdf

The User Guide for Sigmastudio for SHARC:
The Release Note, Reference Guide, Users Guide and Product Spec can all be found in the “C:\Analog Devices\SoftwareModules\SigmaStudioForSHARC-SH-Rel2.2.0\Docs” folder.

Edit:

I contacted the seller to contact the manufacturer to either procure an LDR file for the device in order to then program it to load the schematic at boot. Probably something I should have thought about earlier.

©2022 KLEO Template a premium and multipurpose theme from Seventh Queen

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account