Home Forums DIY Speakers and Subwoofers Trying to design my first soundbar Reply To: Trying to design my first soundbar

  • 123toid

    Administrator
    June 26, 2022 at 10:57 pm

    @tvor-ceasar You are absolutely correct about the horizontal MTM. I mentioned the BMR since it has a very wide dispersion pattern (almost 180 degrees). If it were me doing it, I would cross the BMR’s over low (200-500hz range to get the wide dispersion with minimal issues you typically have with a horizontal MTM.

    @dameo182 That is the main reason I suggested the BMR. The high end will definitely be better with this type of build. As I mentioned before, the lower you can cross the BMR’s over the better it’ll sound to all seats.