Great tips once again. Thank you. I had a couple of quick questions on this.
First, you mention that you incorporate the BSC into the first order of the crossover. If I understand you correctly, you are just adding the BSC inductor value to the single crossover? This being the case, are we just ignoring the resistor in the BSC?
My next question is with respect to the crossover point. Earlier in this thread, you suggested that the crossover point should be 4200Hz minimum given the Fs of the tweeter. The crossover that you have mocked up is in the 3500Hz range. Wondering what the impact/knock-on effects of this would be since the lower crossover point would help to tame the spike at ~3000Hz on this particular full-range driver.