That is exactly what I need, thank you for the response and guidance!
I’m looking at the <span style=”text-decoration: underline;”>Dayton MX12-22 12″ Max-X</span>. But would only need a little arm twisting to bump up to the <span style=”text-decoration: underline;”>Dayton UM12-22 12″ Ultimax</span> if that would be better suited for this application.
Planning to construct the box out of 3/4 MDF, but the port will end up passing through the wall and into my theater space. Is that what you’re asking for baffle thickness? 3/4″ MDF + 4.5″ of wall.
I’m picturing something like this, but open to any suggestions!! (drawing only shows partial wall, but it is a full wall IRL)
