Those are 4 microfarad at 125V. In parallel, the capacitance adds up, so the total is 12 µf. Try to keep the voltage the same as the original. This chart can help you see where they chose the crossover point.
by 123Toid
Blog › Forums › Consumer Electronics › Wharfedale W70 – Advice › Reply To: Wharfedale W70 – Advice
tvor-ceasarThose are 4 microfarad at 125V. In parallel, the capacitance adds up, so the total is 12 µf. Try to keep the voltage the same as the original. This chart can help you see where they chose the crossover point.