Blog › Forums › DIY Speakers and Subwoofers › The Cinema 10 build – The novice edition › Reply To: The Cinema 10 build – The novice edition
May 25, 2023 at 6:32 pm #27802
Installing the Woofer
There are three sets of wires on the crossover. The first set connects to the binding post, the second set connects to the woofer and the 3rd one connects to the horn tweeter.
Connected the first set of wires to the binding post to accept the audio signal from the amp. I used the crimp tool to add connectors to wires. Also add the dampening material at this point:
The woofer goes in first:
Putting it in: