AdministratorNovember 25, 2021 at 1:23 am
First, the crossover response looks great! You appear to be exactly in phase shown by the 6db from the crossover point to the final response above it. As far as the impedance, that might be a little off. It really depends on what will be driving it. But your entire tweeter has impedance has been changed from 8ohm to closer to 4ohm. I would try to raise it closer to 6.5ohm. One easy way to do this is to put a 1.5 ohm resistor before your tweeter crossover. However keep in mind that this will change the shape of your curve. Another way would be to try to increase your inductor size on your tweeter. It is hard to say without having the actual files.