Home Forums DIY Speakers and Subwoofers DIY Studio Monitors Project Reply To: RE: DIY Studio Monitors Project

  • chedwin

    Member
    October 3, 2021 at 10:19 pm

    @prod-arhan i dont think you have a high impedance issue there. the curve you are seeing (≈9.5Ω @ 20Hz) matches the impedance curve from the spec sheet

    all drivers are rated at their nominal ohms rating, you will always have variation of impedance accross frequencies due to various reasons e.g. physical/electro acoustic properties of the driver and/or how the air in the cabinet and port(s) damp the drivers movement at different frequencies.

    please read this https://audiojudgement.com/speaker-impedance-curve-explained/ and let me know if you have further questions


    Josh Evans, Professional Live Sound Engineer, High End Commercial AV Install Technician

    Reply To: RE: DIY Studio Monitors Project