Home › Forums › DIY Speakers and Subwoofers › Enclosure design to re-use 2.25" Bose SoundDock drivers › Reply To: RE: Enclosure design to re-use 2.25" Bose SoundDock drivers
AdministratorJanuary 13, 2022 at 4:59 am
@sailcs33 I agree with everything that has been said. I believe Bose typically uses DSP. Of course, since you aren’t digging down as low, you probably could get away with just a simple BSC. If you have a multimeter measure each drivers impedance. Once you get that, you could try to figure out it’s BSC here. Of course, it is hard to say at what frequency those drivers will be good at. They may not be good past 200hz.