Home Forums DIY Speakers and Subwoofers Enclosure design to re-use 2.25" Bose SoundDock drivers Reply To: RE: Enclosure design to re-use 2.25" Bose SoundDock drivers

  • sailcs33

    Member
    January 13, 2022 at 5:49 pm

    Thank you all for all the responses. I’ll give it a go. So far I have completed step 1 which is removing any electronics from the SoundDock and just leaving the drivers in. I wired the leads outside to connect to another amp. To my ear things have improved but this is not my final goal. I would like to separate the left and right channels from being in the same box.

    I’ll make up a basic housing from 3/4 MDF and compare test sweep frequencies.