Blog › Forums › DIY Speakers and Subwoofers › Inspiration Gallery › Reply To: RE: Inspiration Gallery
May 28, 2019 at 3:59 am #8616
UM18 Marty Cube with hemlock trim and mahogany veneer in down firing configuration. Conceived as an end table but at 27″x 25″ x 27″ slightly on the large side 🙂 My dad and I worked on this together over a few months. This was a fun project but a lot of finish work. I am happy with the results and it has pretty substantial output with a bridged inuke 3000DSP at 1200 watts.