Home Forums DIY Speakers and Subwoofers My first DIY speaker help me fix them Reply To: RE: My first DIY speaker help me fix them

  • tvor-ceasar

    Moderator
    March 4, 2021 at 2:46 am

    Try adding a 4 ohm resistor between the x-over tweeter output and the tweeter. That seems to level it off nicely in XSim. More (or less) might be necessary, since the values of the compnents aren’t marked, and I really didn’t trace the board out to see how it was all connected. It’s at least a start. You can fine tune it by ear to suit your taste.

    You could also try “flipping” the tweeter connections; instead of + to + and -to -, try + to – and – to +. It all depends on which way you like it.