Home Forums Consumer Electronics Need a small 2.1 Amp Reply To: RE: Need a small 2.1 Amp

  • 123toid

    Administrator
    December 30, 2021 at 8:01 am

    @stevem 

    Well you have two options.  The first is (assuming the passive crossover version), just running these full-range and equing it.  The second, you could use with either version of the Dinas and that would be biamping the Dinas.  So take the L and power the top half of the left Dinas and the R to power the right half.  Then parallel the subwoofers together and running them of the subwoofer out. Supposedly that amplifier will handle 2 ohm.  If it doesn’t you can still run it this way, but you would need to wire the subwoofers in series. 


    Reply To: RE: Need a small 2.1 Amp