Home Forums DIY Speakers and Subwoofers Passive Crossover Design Needed Reply To: RE: Passive Crossover Design Needed

  • jamas

    Member
    September 3, 2021 at 7:38 pm
    Posted by: @mistersota

    @jamas To calculate the amount of delay to enter you really are going to have to guess without any frequency response measurement equipment. I would take the back of the woofer cone to the tweeter. The tweeter will be ahead of the woofer by that distance. You have to be aware that without proper measurement equipment you will be making compromises and won’t be able to get anything perfect. 

    Sorry for the delayed response, I’m pretty busy currently.

    Is ok man. Thank you for all of your advice. Is a lot for me. Now is my crossover ready, and sound amazing. Full range + tweeter sound more “crispy detail” :). I know is not a sound for profesional ears, but is very good. Again thank you…