@schlegelino
Forum Replies Created
-
Posts
-
push
hello
@Toids_DIY_Audio if you want design this speaker in fusion 360 (if I remember correctly you said something like this on your livestream) i’m happy to give you a overview of all this essential things and if you want even how to set up your CNC routs directly in fusion. I’m using it since 2019 for all my projects and CNC routing ;).
We could hop on a zoom call and I can walk you though, if you like.
Hi my Ordering date 19.05.24 is coming closer and I was playing around in the simulation of the crossover and found that the eminence n314x-8 would cross over great with two SB Audience NERO-12MWN400D and a lower order crossover, do you see any drawbacks compared to one 15″ driver when using a set subwoofers for the low end?
PS: The EU Links in your Pint Sized Powerhouse Build Plans have shifted
Okay thanks,
I’m well aware, that I need a new crossover and I have an OmniMic V2, but no DATS.
I already designed and build 4 speakers on my own and designed the crossover in Virtuix CAD and I think they sound great, but I used the impedance curve given by the manufacturer and all of them use a simple dome tweeter.
Why do I need the DATS?
My guess is that I need it because the horn changes the impedance of the tweeter in the crossover point, am I right?
If so I’m willing to order one.
I would be really happy if you could (at least) check the crossover after I designed it, but I’ll think I will start with the project in the beginning of year.
Thank you in advance.
