This is for the build plans to build your own pair of Dinas. Dinas is short for Do I Need a Subwoofer. And that is because each speaker has it’s own powered subwoofer that goes down to an impressive 35hz. These are the Speakers you saw 123Toid from YouTube build and JoeNTell Review. These speakers utilize an amplifier on each speaker to power their own subwoofer and the midrange and tweeter independently. It is a very powerful set of speakers that uses these components:
As well as a crossover diagram that comes with the plans.
For a pair of speakers the component cost is around $250-$300.
The Finished Design is around 12.5″ Tall, 7.5″ Wide and 10″ Deep
Each speaker has it’s own redesigned voxel subwoofer. It is redesigned with a slot port that reduces port noise and increase sound quality. They feature a full range driver in it’s own sealed enclosure and a tweeter to help give the speaker a full frequency range to 20khz.
The projected Frequency response is around 35hz-20khz, making these a true full range speaker.
Since each speaker uses it’s own powered amplifier. you will hook these up with RCA cables and not speaker wire. For theater use, you would hook these to a receivers 7.1 channel RCA output. For stereo listening you can either use a 3.5mm to rca cable or a preamp with rca outputs.
The build plans do download as a PDF.
If you have any questions feel free to ask.
For more information, feel free to check out the YouTube videos: https://www.youtube.com/playlist?list=PL6hjpiCHZmIM_X8l3IeOetawMfgdmXCny