Ever want true movie theater sound in your home? That is exactly what the cinema 6 is designed to do. This is an upgraded version on the speakers I designed last year. But these use what is often known as arguably one of the best compression drivers available for consumer purchase. Paired with 2 faital pro woofers, the Cinema 6 are perfectly designed to crossover at 80hz. In this way, they give you a sensitive speaker with a very wide (90 degree by 50 degree) soundstage and very low distortion. Meaning you don’t need much power to get these loud and clean. In fact, these should easily be driven with just your home theater receiver.
Each Cinema 6 uses these Drivers and Waveguide:
- (1) B&C DE250: https://bit.ly/3hkc0tL
- (1) Eminence H290B Waveguide: https://bit.ly/2RQPzmW
- (2) Faital Pro 6fe200 : https://bit.ly/6Fe200
- Crossover components listed in the plans.
Each speaker costs approximately $250-260 in parts.
When complete the Cinema 6 will be approximately:
- 15″ Tall
- 12.5″ deep
- 17″ Wide
Now if you prefer a narrower soundstage, you can flip the Cinema 6 on their side as well, which would then give you a narrower 50 degree wide soundstage.
These plans will include all the information needed to make these speakers. Including a cutout list, cutout sizes, crossover layout and brace information.
*These plans are for personal use only. Commercial or resale is prohibited.