The Reveal MTM
After completing the Reveal, I was so impressed with them, I decided to make an MTM version. This MTM version, is a sealed speaker that was designed specifically with Home Theater in mind. I also tested this to see how it would work in a horizontal position for those who may want to make this into a sound bar. It should be mentioned that the PC83-4 drivers are great at recreating midrange, but have limited Xmax, so these are designed to be used with a subwoofer.
Build Video/Sound Test:
Part List: per speaker
(1) ND20FB-4
(2) PC83-4
Sub Build: Link coming soon
Crossover Components:
(1) 15uf capacitor
(1) 10ohm Resistor
(1) 0.75mh inductor
(1) 14mh inductor
(1) 4ohm inductor
Build Plans: Coming Soon – see video for now
*These plans are for Personal use only. If you want to resell these, contact me first.
Hi i was planning to build one MTM using dayton componentsGreat video btw
hi i want to build one..thank you